Sanding decorative grooves on CNC routers
...with Face Profile Sanding Discs on vertical spindles

The flexible facilities of CNC routers or workcenters enable these decorative elements to be put in place in the design using commercial production methods. Nothing can be done with just the grooving cutter, however. ARMINIUS TOOLING’S perfectly profile-conforming sanding tools present the solution to this problem.

Whether using solid wood, with the problem of frequent shaping against the grain, or e.g. MDF, with the less dense compression under the highly compressed surface, with the consequent lifting of the fibres during shaping, the resanding of such decorative grooves is necessary.

• For all decorative contours in panel surfaces
• No limitations to the acuteness of the profile contour
• Smallest tool diameter with sanding range up to the centre of rotation
• Change of abrasive backing in less than 1 minute
• Part automatic ejection of worn abrasive and reserve magazine for automatic attachment of the new profile abrasive backing.
• Repeat accuracy of the abrasive backing +/- 0.05 mm, so eliminating need for tool offset following tool change
• No tool offset during progressive blunting of the abrasive grain due to the abrasive’s flexible rubber backer
• Disproportionately long service life of the abrasive as against that used on larger tool diameters
• Abrasive is automatically kept free of/cleaned of the resin present in softwoods
• Revolutions of spindle up to max. 2000 r.p.m.

Download brochure as PDF